Home » Troubleshooting » The main issues of plastic mold development

The main issues of plastic mold development

In recent years, China's plastic mold industry is rapidly developing, but there have also been some problems in the development. People in the industry know that each molded product is complex, the processing program is large, and the unit price is high.   About other issues, the plastic mold manufacturers have summarized The following factors.

1. Unbalanced development and low overall product quality.
Although the products of individual companies have reached a fairly high level, some of the products of individual companies have reached or are close to the international level, but overall, the accuracy of molds, cavity surface roughness, production cycle, life expectancy and other indicators with foreign advanced level There is still a big gap. The overall level, including production methods and enterprise management, still has a gap of more than 10 years compared with foreign industrialized countries.

2. The technological equipment is backward and the organization and coordination ability is poor.
Although some of the plastic mold factories have undergone the technological transformation in recent years and the level of technological equipment has been relatively advanced, most of the company's technological equipment is still relatively backward. What is more important is that our corporate organization has poor coordination capabilities and it is difficult to properly integrate or mobilize social resources for my own use. This makes it difficult to undertake relatively large projects.

3. Most companies have weak development capabilities.
On the one hand, the proportion of technicians is low, and the level is not high enough. On the other hand, less investment in scientific research and development, and more importantly, the concept is backward, and the importance of development is insufficient.

4. Management lags behind technology.
Backwardness in technology is often easy to see, and management is sometimes difficult to realize. The gap between the management of mold companies at home and abroad is very obvious, and the problems caused by the management gap are often more serious than the technical gap.

5. The settlement of institutional and talent issues will take some time to come.
In the socialist market economy, in the process of economic globalization, competitive industries, especially those that depend on special users like molds and require single production, are still difficult to adapt to the current system and operating mechanisms of many enterprises. Market. The quantity and quality of talent cannot keep up with the rapid development of the industry. Although all localities are working hard to solve these two problems, it will take time to get a better solution.

6. The market demand is strong and it is difficult to keep up with the development of production.
The contradiction between supply and demand is difficult to solve for a time. The situation of supply exceeding demand will continue for some time, especially in the middle and high-end products.

Post a Comment:

Plz Calculate (4 + 3) =
(Your comment will show after approved.)

You may also like:

Featured Articles
How to Choose a Good Chinese Injection ... How to Choose a Good Chinese Injection Mold Company?It is very important to choose a good mold manufacturer, because they not only can provide you with satisfactory molds, but also ...
Precision Injection Mold Technology in ... Precision Injection Mold Technology in ChinaThe development of precision injection molds, precision injection molding was first produced in the 1970s. With the development ...
Plastic Injection Molding Process ... Plastic Injection Molding Process SimulationThe propositions behind injection molding process simulation are very basic. First, that although our plastic materials and ...
Visit injection molding factory in ... Visit injection molding factory in China before closing the dealNot being in the injection molding industry, I was looking for tips on how to judge a company or factory on their capability or ...
Injection Mold Cooling Design Injection Mold Cooling DesignThe design of the injection mold cooling system is very important. The cooling time takes up 70% to 80% of injection molding ...